Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Baha (Shawn)]

Might I suggest that a shortened hood prop-rod from a modern car would work well and be very clean?





Or you can remove the latch from the body, mound it in a tube that can be slid out and locked in place with a knob, thus raising the actual position of the latch. Just reach under the car turn knob, raise decklid to desired height, tighten knob

Man I miss the smileys

[Jack Kessel]

Might I suggest that a shortened hood prop-rod from a modern car would work well and be very clean?

You wouldn't be insinuating that my board isnt clean looking, would you? (;

[scarecrow]

Might I suggest that a shortened hood prop-rod from a modern car would work well and be very clean?

Nah don't have those parts laying around, but I am going to add a second clevis pin to hold prop in place when not in use instead of the c clamp

[Jack Kessel]

Nah don't have those parts laying around, but I am going to add a second clevis pin to hold prop in place when not in use instead of the c clamp

What! the c-clamp is killer....cant get more rat then that.

[scarecrow]

OK, the  c clamp idea was just a tad too crude even for my sensibilities & awkward to use. Large washer is slotted & ground down on the ends and goes in last to act as a wedge & make everything tight. Drilled a hole for a zip tie so it can't vibrate loose & fall away. When not in use I just fold the prop in, turn the clevis pin the other way & install clip. All that shows @ that point is one hole & the top of the pins.

[6T5 square]

I still think this is the way to go

[scarecrow]

For when I want to open those 7 oz. bottle of Coke

[Baha (Shawn)]

For when I want to open those 7 oz. bottle of Coke

[Evil-Tunes (Glen)]

Added a HULA GIRL Today

 


Cheers
 Glen

[scarecrow]

Added a HULA GIRL Today

 


Cheers
 Glen

Cool, I like it

[Baha (Shawn)]

He had to... I wasn't giving up Liliuokalani.

[Evil-Tunes (Glen)]

He had to... I wasn't giving up Liliuokalani.

Hay thats her how did you get to change her dress.
Cheers
 Glen

[Jack Kessel]

Hay thats her how did you get to change her dress.
Cheers
 Glen

The girls don't call him slippery hands for no reason.

[Jack Kessel]

While working on my deck lid prop I had to turn the air down, was getting to chilly.

[Jack Kessel]

On my way out to the garage to put swivel footed adjusting screws on the straps engine.