SJVWC Forums
Busted Knuckle Garage => Technical Articles => Front End repairs => Topic started by: lovebus (jack) on February 25, 2012, 07:35:20 pm
-
How to place the shims and the number used
After you measure the offset use chart below to see how many shims to use on upper and lower link pins.
(http://i326.photobucket.com/albums/k416/6d4vdub/Forum%20Stuff/Link_Pin_Shims_document.gif)
How to replace King & Link Pins in your bug.
Click on link to go to our playlist and click on King & Link Pins
http://youtu.be/pHB9GpN_sdw
-
hey the links not working! whats up with that?
-
"We're sorry, the page you requested cannot be found. Try searching for something else."
whistleegi
-
http://youtu.be/pHB9GpN_sdw
-
hey the links not working! whats up with that?
But the pin is.
-
you're on one day every six months and thats the best you can come up with?
-
Hey, again I want to thank all that helped with this! thumpup)- thumpup)- thumpup)- Greatly appreciated!!
Downloaded the movie
-
you're on one day every six months and thats the best you can come up with?
Sorry :confused04:;
-
So when I decide to tackle this job, should I replace BOTH the link pins and the King pins at the same time or should I wait until I take it apart to decide what parts I need?
-
It is recommended that you replace king pins and link pins at the same time. I think partly because of worn components and partly because you already have the entire assembly apart. I have always replaced both 2@cent.
-
Do both!
-
I still have a Brand New set of King Pins. They're yours if you want them. Im off all week if you want to come get them (freebie)
Joe T took the Link Pins. Guess he's not a replace 'em BOTH kinda guy
-
Cool! I'll take em! I'll give you a call this weekend.
Thanks
-
thumpup)-
-
I still have a Brand New set of King Pins. They're yours if you want them. Im off all week if you want to come get them (freebie)
Hey Shawn, is the offer still open? If so, I'll be at the meeting monday night. Thanks.
-
Hey Shawn, is the offer still open? If so, I'll be at the meeting monday night. Thanks.
Yup... Ill grab em
-
I still have a Brand New set of King Pins. They're yours if you want them. Im off all week if you want to come get them (freebie)
Joe T took the Link Pins. Guess he's not a replace 'em BOTH kinda guy
I already had the kingpins and bushings.