Text only | Text with Images

SJVWC Forums

VW Lounge => General Forum => Topic started by: vwtrike (Rich) on May 14, 2014, 06:27:12 PM

Title: pushrod tube
Post by: vwtrike (Rich) on May 14, 2014, 06:27:12 PM
Is there any way to replace the pushrod tube without taking the head off. :confused04:;
Title: Re: pushrod tube
Post by: Baha (Shawn) on May 15, 2014, 08:19:36 AM
Yes.
Remove the pushrod, rip the tube out with a pair of pliers and replace it with a spring-loaded or threaded expandable type

Title: Re: pushrod tube
Post by: 3Gear on May 15, 2014, 01:43:05 PM
Quote from: Baha (Shawn) on May 15, 2014, 08:19:36 AM
Yes.
Remove the pushrod, rip the tube out with a pair of pliers and replace it with a spring-loaded or threaded expandable type

What Shawn said, I just did one on my Vanagon!
Title: Re: pushrod tube
Post by: Ant (Pop's Garage) on May 15, 2014, 02:22:59 PM
Quote from: 3Gear on May 15, 2014, 01:43:05 PM
What Shawn said, I just did one on my Vanagon!
y on the vanagon?
Title: Re: pushrod tube
Post by: Baha (Shawn) on May 15, 2014, 02:23:41 PM
Cause it leaked...  ?/banghea?/







#@rofl3
Title: Re: pushrod tube
Post by: VWPANZER1 on May 16, 2014, 01:01:40 PM
 While I've never done this, I believe, first, you have to take the valve- cover off, loosen the rocker- arm adjustment just enough to get the pushrod out.
Title: Re: pushrod tube
Post by: vwtrike (Rich) on May 16, 2014, 04:34:54 PM
My friend checked the tubes and found no leaks (good news).  We will replace in the Fall. He adjusted the valves, put exhaust on and started the trike. Next day with no rain I'll go for a ride.
Who sells the push rod tubes.
Title: Re: pushrod tube
Post by: Baha (Shawn) on May 26, 2014, 10:23:53 PM

(https://www.airheadparts.com/ProdImages/pZVW-109-336.jpg)

https://www.airheadparts.com/vintage-vw-parts/crankshaft-camshaft-pushrod/pushrod-tube-adjustable-zvw109336
Text only | Text with Images