pray for weezer

[6T5 square]

thanks Joe but you know how cheap I am. I have another spare type3 case in the garage if this one is shot but it has sentimental value being it was the original.  =+grouphu9

[VWPANZER1]

   I understand, if you can keep the original case then by all means try and save it. I know it's a tetanus job to accurately check all the dimensions. Then you have to trust a machine shop who may or may not have the right guy doing the work.

   My last encounter with a shop was a disaster, It was recommended for good quality hi-performance work. the  over-sized valves seats had  only the initial  grind, the seats had deep ridges  It's a good thing I took it apart to hand-lap the valves or I would have never caught it.  They never gave it the final finish. They did it right the second time.

[6T5 square]

thats what I'm afraid of Joe- them screwing up a case that they dont see very often.