What did you do to your VW today?

[Evil-Tunes (Glen)]

While waiting for the Pressure plate to get here I put the two back motor mounts in.

I think I found the chattering I was getting while starting  in first gear.

Mounted the Voltage Regulator on the Generator

Cheers
Glen

[rich67vw]

Found flags for the MugBug for Clayton parade.

[Beetleboi -Greg-]

My flags are still in Mildred from last year!

[Baha (Shawn)]

My flags are still in Mildred from last year!

Everything's still in Mildred from last year!!!   &^rofl &^rofl

[rockdog2877]

went on my first dive out side of the hood, went from manayunk to the airport for work.
no parts fell off, and no flames! (no 76 either)

[buglvw (Howard)]

Installed new speedometer cable today. Old one went kaput.

[lovebus (jack)]

went on my first dive out side of the hood, went from manayunk to the airport for work.
no parts fell off, and no flames! (no 76 either)

**^bana0

[Baha (Shawn)]

Took the Syncro to work. Man, I love the way it rides

[Evil-Tunes (Glen)]

Put the pressure plate,clutch, and throw out bearing on and put the motor back in the buggy. :jump4jo": **^bana0 :jump4jo": **^bana0
Rich stopped buy and helped with the wiring. Thanks Rich.  Trying to get the motor started I got the wires switched on the coil and Oil switch  ?/banghea?/ I think I fried the sending unit  bawlin)0
The motor Started   2@@cool. I guess Murphy was sitting out side the door when I went to adjust The clutch cable It broke. &(rage_
Not sure If the buggy will make It now. I'm going to see if I can Rig It some how because I'm running out of time.
I hope Polarizing the Generator works because the white light is on. }dunn--

Cheers
Glen

[Celly]

Glen,

Panty hose and duct tape...works every time.

-Celly

[rich67vw]

I ain't touching Celly's comment :)

[Evil-Tunes (Glen)]

Glen,

Panty hose and duct tape...works every time.

-Celly

I decided to go A different route Celly. I did think about it tho   &$hmmthin_+

The Fix.... I grabbed the Spare Clutch Cable. Thanks (Shawn/Tyler) From the Bus & Hit the hardware store.






Now I have a New/Old problem   16rooler  The Dam thing Chatters and Hops Like a bi ch   Starting off in first gear.
I thought the new engine mounts would have solved it. It would do it before but not this bad....


Cheers
    Glen

[lovebus (jack)]

Do you have a nice bend in the preload tube?

Did you try pushing up and down on the tail pipes to see if the front mount was bad?

[Baha (Shawn)]

Eeeek...



Cable clips in a "butt-splice" might slip. A loop in each cable would be better but, any port in a storm

[Ant (Pop's Garage)]

weld the cable with that set up on it so it wont slip