used price question

Started by rockdog2877, December 05, 2009, 11:45:55 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

rockdog2877

December 05, 2009, 11:45:55 AM
So I have myself an extra Hydro cam from my engine pulling. I was thinking of selling it, but I havn't seen any for sale on the samba. they run 250 or so new, what would be a fair price for a used one?
70$

rockdog2877

#1
December 09, 2009, 03:22:51 PM
Not even a smart a** coment?
I just miked it and it is within spec.
Or do people just not buy used cams?

njgt-1

#2
December 09, 2009, 05:07:30 PM
Don't know about a hydro cam but I would never put a used cam in an engine for a simple reason. The lobes and lifters "break in' together and "work harden". If you were to reuse a cam with new lifters the wear patterns & different hardness factors could cause some problems. If you had the original lifters and kept them in the order they were in when working with the cam it might work ok.

2CENTS
\\\\\\\"Either write something worth reading or do something worth writing\\\\\\\"

Ben Franklin

rockdog2877

#3
December 09, 2009, 06:42:18 PM
Does that make the cam worthless? I thought with a new lifters it would work. I hate to trash it if some one could use it.

Baha (Shawn)

#4
December 09, 2009, 10:18:21 PM
Make a trophy out of it... or a lamp. Don't think you'll find anyone who'd do a rebuild and would replace their cam with anything but new
The VWs you can sleep in are more gooder

There are 3 kinds of people in this world, The kind that can count and the kind that can't.

rockdog2877

#5
December 09, 2009, 10:29:02 PM Last Edit: December 10, 2009, 12:03:02 AM by rockdog2877
ok Tropy it is.  gifsawsall

njgt-1

#6
December 10, 2009, 05:27:49 AM
Flea Bay ? some people will buy anything..
\\\\\\\"Either write something worth reading or do something worth writing\\\\\\\"

Ben Franklin

braidmeister

#7
December 10, 2009, 09:45:51 AM
There's absolutely nothing wrong with running a used hydraulic cam. New lifters are not an issue with a used hydraulic cam either. A flat tappet solid lifter cam, like the stock Type1, is a different animal altogether. You don't need to break in a hydraulic cam like a solid cam & the lobes on a hyd cam usually aren't wiped out.

I'm sure somebody will buy it on the Samba or Ebay. If they get $250 for a new one, ask $35-50 for it. Somebody will eventually buy it...and a Samba ad is free.

-B

rockdog2877

#8
December 10, 2009, 10:20:40 AM
That's what I was thinking, it is still good! I will try this "samba" that you speak of.(j/k)

perdecas

#9
December 14, 2009, 03:16:31 PM
we surveyed 100 people and came up with the top three answers.....
#1. the cam should work like meister,misterbraid @7@ @7@  well the guy with the red truck said.
#2. one man's junk is onother man's treasure.
#3. there is a buyer for everything!!!

rockdog2877

#10
December 16, 2009, 06:27:26 PM
Quote from: perdecas on December 14, 2009, 03:16:31 PM
we surveyed 100 people and came up with the top three answers.....
#1. the cam should work like meister,misterbraid @7@ @7@  well the guy with the red truck said.
#2. one man's junk is onother man's treasure.
#3. there is a buyer for everything!!!

what was the margin of error for the survey ? was it a double blind survey?
did the test for regional variances?
Print
Go Up Pages1
User actions