LoveBus repairs

[lovebus (jack)]

I don't believe I let the valve adjustment go for so long, as posted on FB this is the first I adjusted the valves sense I got the bus. I had two valves that were a little tight slap&head

The swivel footed adjusting screws are a pain because the screw is hex head and its harder to hold the adjustment using an allen wrench while tightening the nut.

Boy time flys by, it was a year that I changed the oil last. even so the heads and valve covers were clean as can be. I dropped the strainer plate to check for any bearing ware or other foreign particles laying there but it was clean as a whistle like the heads. I only put 1,434 Miles on the bus last year, I thought it was more. I replaced the oil filter, and I wright the millage and date on the filter.

[Baha (Shawn)]

I write the millage and date on the filter.

Thats a pain in the  ?/moon2.. climbing under there all the time to see if it's due. I use a windshield sticker like the gas stations  #@rofl3

[matt]

Lol!




  Or just get a tattoo

                          - that's why you have two arms and legs....

[6T5 square]

you need any help with that tune up, buddy?

[lovebus (jack)]

Thanks John but not doing a tune up but I'll need help when I do a reseal before I do the RT=66 trip.

Dam, it took me all day just to do what I did, I use to be able to do that in an hour.  %$oldcit

[Baha (Shawn)]

The secret is not closing your eyes for 2 hours while you're under there!  #@rofl3